Double wall isulated stainless steel flue
Adapter
This component is necessary for the isolated single flue connection to the double wall flue. Can be connected both to a Tee and the straight section.
Rain cap
Rain cap normally protects the chimney from rainfall and falling, flying objects and creatures to get into the flue.
Condensate tray
Component, which is for condensate and rainfall removal from chimney. If the flue length of less than 7m, then cleaned with the trap discharges condensate is optional.
Elbow 15
If the design of the building does not allow the installation of flue straight, then with elbow 15 degree may be designed chimney in any direction.
Elbow 45
If the design of the building does not allow the installation of flue straight, then with elbow 45 degree may be designed chimney in any direction.
Elbow 90
If the design of the building does not allow the installation of flue straight, then with elbow 45 degree may be designed chimney in any direction.
Inspection with the condensate tray + Tee
Inspection is a flue phase, which is used for cleaning soot from chimney. Normally, to the base of inspection is attached condensate tray. Most often the next step after the inspection followed by the Tee connection
Inspection with lid
Inspection is a flue phase, which is used for cleaning soot from chimney. Normally, to the base of inspection is attached condensate tray. Hermetically obscuring the cleaning hatch.
Locking band
Each stage of flue is connected with locking band. Locking band can be used repeatedly, so the flue assembly and disassembly is much easier as opposed to where the flue sections are joined together with rivets.
